Professional Aerosol Disinfectant Fogger & Sanitisers

Benefits & Unique Selling Advantage

Of this PPE Range

       COMMERCIAL, INDUSTRIAL & AUTOMOTIVE

       RAPID DISINFECTING ACTION

       TOTAL RELEASE AEROSOL

       BROAD-SPECTRUM BACTERIAL,

       BROAD-SPECTRUM VIRUCIDAL

       BROAD-SPECTRUM FUNGIDICAL

       FOOD SAFE

       PROFESSIONAL AEROSOL

       98% ethyl alcohol – WHO requires 70% alcohol for effective sanitisation.

       two additional actives ensuring TOTAL disinfection and provides residual disinfection to the surfaces. Kills SARS type-2 Viruses; specs available

       G-Cide effectively kill 99.9% of bacteria, viruses, fungi, moulds, and spores.

       Fragrance-free Fogger might be used for food prep areas and areas needing more precaution.

       Easy to use, whole space disinfection

       Ready to use

The rubbing alcohol and alcohol-based sanitisers most often used to kill bacteria are solutions of alcohol, either ethyl alcohol or isopropyl alcohol, both of which are amphiphile chemical compounds. The properties of these alcohols allow bonding with and breakdown water-based membranes and disrupt protein structures suspended in water. The molecules in the membranes and proteins easily bond with the alcohol molecules. Because single-celled micro-organisms like bacteria and viruses are primarily composed of water, with fatty proteins suspended within them, alcohol’s amphiphile characteristics make it incredibly effective as a sanitising agent. Cells exposed to it cannot survive in alcohol’s presence for more than a few minutes.

In addition to that we have added two additional actives to the aerosol fogger, which ensures total disinfection and provide residual disinfection to the surfaces. This means that once the alcohol has evaporated, the other additives remain on the surface to continuously disinfect until washed or rubbed away:

The first is our Enviro disinfectant which are at the standard required as per the EN1276 Test Report attached. This is backed by the raw material components for which the Lonza document is attached. The purpose of this document is to demonstrate the effectiveness of the ability of the product to kill SARS type viruses.

According to EN 1276, the product shall demonstrate at least a 5 log reduction when diluted and tested under simulated clean and dirty conditions and under the obligatory test conditions (four selected test organisms, 200C +/- 10C, 5min +/-10s).

Under simulated clean conditions the test item, ENVIRO DISINFECTANT, 17-CHL-0548-02, demonstrates more than a log 5 reduction for strains P. aeruginosa, E. coli, S. aureus and E. hirae, for one concentrated test: 10%.

Under simulated dirty condition the test item ENVIRO DISINFECTANT, 17-CHL-0548-02, demonstrates more than a 5-log reduction for strains P. aeruginosa, E. coli, S. aureus and E. hirae, for one concentration tested: 10%.

The second is G-Cide, which is a stabilised glutaraldehyde used in medical and other disinfecting applications. G-Cide is unique in that it does not require alcohol to effectively kill 99.9% of bacteria, viruses, fungi, moulds, and spores. G-Cide is a unique biocide (able to kill living organisms, especially microorganisms) that is used in our disinfectant range as the active ingredient to kill 99.9% of all germs it comes into contact with including the Corona Virus.

Overall an extremely powerful disinfecting product, in a convenient fogger application. Professional use is recommended, and training of the relevant staff members to ensure safety and compliance.

WARNING:

HANDLE WITH CARE & ALWAYS WEAR A MASK WHEN SETTING PRODUCT OFF.

Avoid skin and eye contact.

Active Ingredients:

 

N-, N-Dialkyl-N,Ndimethylammonium

bicarbonate/carbonate 1%

Glutaraldehyde 1%

 

High concentration, hands free, aerosol- based disinfectant for the sanitation and decontamination of food preparation, processing and storage areas. Suitable for offices, halls, homes and general work-spaces.

For this purpose a fragrance-free fogger might be used for food prep areas and areas needing more precaution.

 

 

 

PRODUCT SPECIFICATIONS

 

AEROSOL DISINFECTANT FOGGER: COMMERCIAL, INDUSTRIAL & AUTOMOTIVE

Sanitizing and decontamination spray

Advantages:

 

• Easy to use, whole space disinfection
• Virucidal and fungicidal properties
• Broad spectrum anti-bacterial
• Rapid disinfecting action.
• Available fragranced or fragrance free
• Ready to use

Physical Properties:

 

Foam : None.

Specific Gravity : 0,79

Colour : Colourless and clear.

Odour : Typical, alcohol.

Hazards : Flammable.

Heat Stability : Recommended for use below 30 degrees Celsius

 

Storage and Handling:

Store this product in a cool, dry, dark, locked room. This product must be stored in a place where it cannot be accidentally knocked over and it must be out of reach of children. Temperatures higher than 50°C /122°F may cause container to burst. Do not puncture or incinerate the container. Product must be tightly sealed when not in use, Dispose only in accordance with Local Authority regulations, via authorised disposal unit. Do not mix with other chemicals. We recommend the containers are recycled.

The recommendations are based on laboratory tests and in field use experiments. To the best of our knowledge these are accurate and since conditions of actual use ae beyond our control, all recommendations are made without any warranty whatsoever

 

 

 

DIRECTIONS FOR USE:

 

Close all windows and door openings of the area to be treated. Switch off all electrical appliances such as air conditioners, fans and lighting. Open all cupboards and drawers. Place the aerosol in the centre of the room on a flat surface, preferably on the floor, with paper or cloth underneath. Point the nozzle away from yourself to depress the actuator un-locked in position on. Note the aerosol sprays directly upwards. Put down on the prepared floor area and leave the room immediately. Close the door when leaving. Leave the room for one hour, allowing the fog to settle. Ventilate the area for 30 minutes, by opening all doors and windows before occupying the room again.

This 300 ml container is sufficient for 150 cubic metres of room space. For larger areas calculate accordingly. Height of room as well as airflow may affect level of coverage.

Manufactured by Chemical Sciences 300ml/10.14Fl.oz

Distributed by Imsyser Health Pty Ltd.

 

WARNING:

HANDLE WITH CARE & ALWAYS WEAR A MASK WHEN SETTING PRODUCT OFF.

Avoid skin and eye contact. Irritation may occur.

Store at room temperature or below. Temperatures higher than 50°C /122°F may cause

container to burst.

Keep out of reach of children, uninformed persons and animals.

Do not spray on or near open flames or directly onto electrical equipment.

Contents are flammable and under pressure.

Do not puncture or incinerate the container.

Toxic to fish and aquarium life.

 

PRECAUTIONS:

Avoid direct skin and eye contact and inhalation. In the case of skin contact, wash

immediately with water.

Do not eat, drink or smoke whilst using the product.

PS Remove pets and fish before setting product off.

Wear respirator, goggles and protective clothing if entering the area during or after

activation.

 

 

Attachment NO1 – Lonza Issues Guidance on Infection Control

 

Regarding Novel Coronaviruses (2019-nCOV) Lonza, a global leader in biocides & disinfectant formulated solutions, is following the current coronavirus (2019-nCOV,), outbreak closely and providing guidance to help reduce the risk of infection. An outbreak of respiratory illness caused by a novel coronavirus (2019-nCOV)*,** was first detected in Wuhan City, Hubei Province, China in late December 2019. The origin of this virus has not yet been confirmed, but it is now known to spread from person to person.

To date, thousands of 2019-nCOV infections have been reported in China, and they are being reported in a growing number of international locations, including Europe, the United States and Canada. As the number of cases of novel coronavirus continues to rise, the World Health Organization (WHO) has declared a Public Health Emergency.

Coronaviruses (CoV) are a large family of viruses that cause illness ranging from the common cold to more severe diseases such as Middle East Respiratory Syndrome (MERS-CoV) and Severe Acute Respiratory Syndrome (SARS-CoV). 2019-nCOV is a new strain that has not been previously identified. However, due to a general susceptibility of coronaviruses to chemical disinfection, strategies are available to help prevent transmission and infection.

Standard recommendations to prevent infection spread include regular hand washing, especially before and after food preparation, before eating, after toilet use and after handling animals or animal waste, covering mouth and nose when coughing and sneezing, thoroughly cooking meat and eggs. Avoid close contact with anyone showing symptoms of respiratory illness such as coughing and sneezing.

Appropriate cleaning and disinfection strategies are recommended to help control the spread of dangerous pathogens, such as the 2019-nCOV. Lonza’s Microbial Control Solutions business offers formulations for use as hard surface disinfectant cleaners. Multiple Lonzagard® formulations have demonstrated “virucidal activity against enveloped viruses” as stipulated by the EN14476:2013 +A2 2019, which encompasses Coronavirus. These include Lonzagard® DR-25aN Disinfectant Cleaner, Lonzagard® DR-70 Disinfectant Cleaner, Lonzagard® DR-LS-13N Disinfectant Cleaner, Lonzagard® DR-19aB Disinfectant and Lonzagard®

DM 114-10 Disinfectant https://www.bbc.co.uk/news/world-asia-china-51466362

** The virus itself has been designated SARS-CoV-2 by the International Committee on Taxonomy of Viruses

*** https://www.who.int/docs/default-source/coronaviruse/situation-reports/20200211-sitrep-22-ncov.pdf

Use biocides safely. Review and follow all product label and safety instructions. All product information corresponds to Lonza’s knowledge on the subject at the date of publication, but Lonza makes no warranty as to its accuracy or completeness and Lonza assumes no obligation to update it. Product information is intended for use by recipients experienced and knowledgeable in the field, who are capable of and responsible for independently determining the suitability of ingredients for intended uses and to ensure their compliance with applicable law. All trademarks belong to Lonza or its affiliates.

© 2020 Lonza

Hygiene – Lonza Issues Guidance on Infection Control Regarding Novel Coronaviruses (2019-nCOV) – 02/20

Attachment No 2/Refence Material

E-mail: Microlab@aspirata.co.za

Web address: www.aspirata.co.za

EN 1276: BACTERICIDAL EFFICACY

Diluent Used in Test:

Expiry Date:

98% ETHANOL

CHEMICAL SCIENCES AEROSOL FOGGER

FINAL TEST REPORT

SANS 51276:2011 – Quantative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas.

 

Analysis performed by: J. JACOBS

The results reported relate only to the samples tested and is expressed on an ‘as received’ basis unless specified otherwise. The test report shall not be reproduced except in full, without written approval of the Laboratory.

LAB Number: M20-7462 1 of 10 CHEMICAL SCIENCES AEROSOL FOGGER

Conclusion:

Validations and Controls:

Johan Jacobs

Technical Advisor

The product CHEMICAL SCIENCES AEROSOL FOGGER complies with the minimum performance requirement for surface disinfectants as prescribed by SANS51276 at a “Neat” concentration.

CHEMICAL SCIENCES AEROSOL FOGGER was able to eliminate >99,999% of E.coli, S.aureus, P.aeruginosa and E.hirae in a 5 minute contact period under simulated clean and Dirty conditions with the addition of 0,3 and 3g/L bovine serum albumin respectively as required by SANS51276.

All validations and controls were within specifications on during the test

LAB Number: M20-7462 2 of 10 CHEMICAL SCIENCES AEROSOL FOGGER

 

 

 

Rest of the clinical information may be emailed on request: info@imsyser.co.za

 

APPLY FOR BULK PRICES: 086 010 3859 / info@imsyser.co.za